Tooted‪» Air and Fuel‪» Air Cleaners, Filters, Intakes and Components‪» Air Cleaner Assemblies and Air Intake Kits‪»

Proform - 141-302 - 14In Classic Air Cleaner W/ Bowtie Nut

Proform - 141-302 - 14In Classic Air Cleaner W/ Bowtie Nut

Proform - 141-302 - 14In Classic Air Cleaner W/ Bowtie Nut

Hind
148,05 sis. km 25.5% (117.97 €, käibemaks 0) + tarne kulud


Kogus
tk


Umbkaudne kohaletoimetamisaeg 7 - 15 päeva.
Väljastuspunkt Vantaa0 tk
Tarnija ladu14 tk
Saadaval14 tk

Toote kood
PFM141-302
Tootepildid võivad erineda tegelikust tootest. Pilt võib olla illustratiivne kujutis.
Hind sisaldab võimalikku transporditasu tarnijalt kauplusesse
Toote kirjeldus

These air cleaner kits are offered in two styles, the classic, which reflects many years of GM air cleaner styling, and the newer high-performance look. They are equipped with the CHEVROLET Emblem, and they are supplied with genuine GM (AC) air filter elements for maximum airflow. Both the tops and the bases have matching finishes, except carbon-style, and each kit is supplied with necessary mounting hardware. The classic air cleaner kits are supplied with special die-cast Bowtie center nuts, except P/N 141-906, also offered separately. The 14 inch air cleaner kits are supplied with 3 inch tall filter GM P/N 6421746 or AC P/N A212CW. For buyers wishing a taller 4.031 inch filter, purchase GM P/N 8997189 or AC P/N A697C. The bases of the 14 inch air cleaner kits are recessed for a low profile appearance, maximum performance and hood clearance. Technical Note: After installing a new air cleaner kit, always lower the hood slowly to confirm sufficient clearance visually. Minimum clearance of 3.75 inches is required from the top of the carburetor gasket area to the underside of the hood.
Product Details:

  • Carburetor Air Cleaner Kit
  • 14 Inch Diameter
  • Base Drop 1 Inch
  • Classic Style With Stamped CHEVROLET Lettering
  • Made From Quality Steel With Chrome Finish
  • 3.375 Inch Installed Carb Height
  • Includes Bowtie Center Nut
  • 3 Inch Tall Paper Filter Included
  • GM Licensed Product
  • Sold As One Kit


Tarnija osa number: 141-302

Proform Catalog


Pakitud toote või tootepakendi hinnanguline suurus on 366 x 110 x 415 mm.


Carb Flange
5-1/8 in


Kaal
2,3 kg
(pakendatult 3,4 kg)


Saadavus
Hinnanguliselt 7 - 15 päeva tellimusest, kõige varem 19.4.2026.

Tarneaeg?

If the product is available at the Vantaa warehouse, it can be picked up or delivered—usually already within the same day.

Kui tootel kuvatakse hinnanguline tarneaeg 7–15 päeva, siis käib tarnija- laoruumi tellimus nii.

Kontaktankeet

Check also: tarne tingimused

Saadavus
Teavita mind, kui toode on jälle saadaval.


Kommentaarid
Lisa kommentaar

Kaubamärk



Inch Converter

Example: 2.375 = 2 3/8
Tip: rounded fraction is shown to the nearest 1/16.