Strange FO
2073 products
Products» Drivetrain» Differentials and Rear-End Components» Front / Rear End Assemblies»
The price includes any freight from the supplier to the Store
Product description
Price starting from 7665.44 €
Application
Pro Mod Vehicles
Using 16″, 17″, 18″, 19″, 20″, 21″, 22″, or 23″ 4-link centers
Description
Ultra 4-Link Modular Floater Housing Assembly
Includes 2 piece steel rotors & aluminum caliper mounts
Choice of 4 3/4″, 5″, or 5 1/2″ bolt circle
Note
4-Link Plates, Axles, & Center Section Sold Separately
Benefits
Safety
• Housing supports weight, bending loads, and tire shake
• Axle shafts only requirement is to transfer torque
• Prevents the possibility of axle flange breakage
Strength
• Extremely rigid assembly increases gear life
Weight
• Lighter than comparable fabricated steel housings
Available Wheel to Wheel Widths
16″ 4-Link Centers
31.750″ / 33.250″ / 33.750″ / 41.00 *
17″ 4-Link Centers
32.750″ / 34.250″ / 34.750″ / 42.00 *
18″ 4-Link Centers
33.750″ / 35.250″ / 35.750″ / 43.00 *
19″ 4-Link Centers
34.750″ / 36.250″ / 36.750″ / 44.00 *
20″ 4-Link Centers
35.750″ / 37.250″ / 37.750″ / 45.00 *
21″ 4-Link Centers
36.750″ / 38.250″ / 38.750″ / 46.00 *
22″ 4-Link Centers
37.750″ / 39.250″ / 39.750″ / 47.00 *
23″ 4-Link Centers
38.750″ / 40.250″ / 40.750″ / 48.00 *
* 4 3/4″ & 5″ Bolt Circles Only
Call For Other Possibilities
Features
Housing
• 206-T4 cast aluminum
• Hot Isostatic Pressed to ensure casting integrity
• Black Enduraguard® finish
• Large fill cap allows for gear inspection
• Magnetic drain plug
• Lug design prevents plate & tube rotation
• Integral upper wheelie bar mounts
• Designed & machined by Strange
• Material made in USA
Four Link Spacer Plates
• 6061-T6511 billet aluminum
• Pockets engage housing lugs
• Lightened for weight reduction
• O-rings ensure sealing integrity
• Black anodized
Bottom Four Link Brace
• 6061-T6511 billet aluminum
• Eliminates lower 4 link plate welding
• Lightened for weight reduction
• Black anodized finish
Next Generation Floater Spindles
• 4130 chrome moly
• Increased wall thickness
• Machined with large inner bearing radius
• Vastly increases bending load strength
• Prevents spindle elongation
• Press fit into housing tubes
• Inner end secured by internal locking nut
Housing Tube Ends
• 6061-T651 billet aluminum
• Internal pockets engage housing lugs
• Prevents tube rotation
• Black anodized finish
Solid Preload Spacer
• Stainless steel
• Machined to precise width
• Prevents excessive bearing preload
Spindle Lock System
• Billet heat treated spindle nuts
• Threaded & non-threaded holes
• Dog pilot set screws engage washer
• Washer indexes on spindle keyway
• Maintains consistent bearing preload
Timken® Bearings & Races
• Oversized to increase load capacity
• Ensures long bearing life
• Proven quality from a trusted manufacturer
Wheel Hub
• 2024-T351 billet aluminum
• Scalloped with integral rotor mount
• Reduces weight and additional parts
• Lug design allows rotor to float
• Same hub as used for carbon brakes
• Simplifies later brake conversions
Press-in Wheel Studs
• 8740 chrome moly steel
• Anti-rotational head design
• 5/8″-18 available in two lengths
• Aluminum anti-marring washers
• Flanged steel lug nuts
Drive Plates
• 8620 chrome moly steel
• 40 spline with 45° pressure angle
• Scalloped to remove unnecessary weight
2 Pc Stainless Steel Brake Components
• 11 1/2″ OD x .355″ thick stainless steel rotor
• Internal lugs mate with aluminum hubs
• Floating design resists rotor cupping
• Includes aluminum caliper mounts
Four Piston Billet Calipers with Stainless Steel Pistons – B1900 / B1900-RD
• Billet aluminum bodies are extremely ridged & reduce weight
• Stainless steel pistons are corrosion resistant
• All pistons are 1.750″ to provide maximum clamping force
• Choice of black or red finish
Choice of Brake Pads
• Hard – B5020
• Soft – B5010
Options
Supply 4-Link Plates
Standard………………………….. OPRH40
Heavy duty……………………….. OPRH44
HD w/adj shock mnts……….. OPRH45 *
* Allows Ride Height Adjustments Without Affecting Stroke
Related Components
Floater Axles
Hy-Tuf…………………… A2040H24 / A2140H24
300M……………………. A2040M24 / A2140M24
Center Section
Ultra case………………… PRF225 / PRF225-10
Billet case………………… PRF425 / PRF425-10
Axle Type
Ford 10 in
Weight
123 kg(Includes the weight of the packaging)
Availability
Available to order from the supplier. Estimated time of arrival to us 15 - 90 day`s from order.
Delivery time
If the product is in stock in Vantaa, it can usually be picked up or delivered within the same day.
If the product is in the supplier's stock, the product will arrive at the Vantaa warehouse the following week if the order is placed by Monday 6:00 p.m.
If product availability is zero. Ask for delivery time
Contact form
Look also terms & conditions
Detailed availability
Notify me when this product is in stock again
Country of origin
United States
CommentsAdd a comment
Brand
Strange FO Strange Pro Mod Aluminum Housing
Product Images may differ from the actual product. Image may be a representation of this item.
The price includes any freight from the supplier to the Store
Product descriptionSpecial Order Product. Please ask details
Price starting from 7665.44 €
Application
Pro Mod Vehicles
Using 16″, 17″, 18″, 19″, 20″, 21″, 22″, or 23″ 4-link centers
Description
Ultra 4-Link Modular Floater Housing Assembly
Includes 2 piece steel rotors & aluminum caliper mounts
Choice of 4 3/4″, 5″, or 5 1/2″ bolt circle
Note
4-Link Plates, Axles, & Center Section Sold Separately
Benefits
Safety
• Housing supports weight, bending loads, and tire shake
• Axle shafts only requirement is to transfer torque
• Prevents the possibility of axle flange breakage
Strength
• Extremely rigid assembly increases gear life
Weight
• Lighter than comparable fabricated steel housings
Available Wheel to Wheel Widths
16″ 4-Link Centers
31.750″ / 33.250″ / 33.750″ / 41.00 *
17″ 4-Link Centers
32.750″ / 34.250″ / 34.750″ / 42.00 *
18″ 4-Link Centers
33.750″ / 35.250″ / 35.750″ / 43.00 *
19″ 4-Link Centers
34.750″ / 36.250″ / 36.750″ / 44.00 *
20″ 4-Link Centers
35.750″ / 37.250″ / 37.750″ / 45.00 *
21″ 4-Link Centers
36.750″ / 38.250″ / 38.750″ / 46.00 *
22″ 4-Link Centers
37.750″ / 39.250″ / 39.750″ / 47.00 *
23″ 4-Link Centers
38.750″ / 40.250″ / 40.750″ / 48.00 *
* 4 3/4″ & 5″ Bolt Circles Only
Call For Other Possibilities
Features
Housing
• 206-T4 cast aluminum
• Hot Isostatic Pressed to ensure casting integrity
• Black Enduraguard® finish
• Large fill cap allows for gear inspection
• Magnetic drain plug
• Lug design prevents plate & tube rotation
• Integral upper wheelie bar mounts
• Designed & machined by Strange
• Material made in USA
Four Link Spacer Plates
• 6061-T6511 billet aluminum
• Pockets engage housing lugs
• Lightened for weight reduction
• O-rings ensure sealing integrity
• Black anodized
Bottom Four Link Brace
• 6061-T6511 billet aluminum
• Eliminates lower 4 link plate welding
• Lightened for weight reduction
• Black anodized finish
Next Generation Floater Spindles
• 4130 chrome moly
• Increased wall thickness
• Machined with large inner bearing radius
• Vastly increases bending load strength
• Prevents spindle elongation
• Press fit into housing tubes
• Inner end secured by internal locking nut
Housing Tube Ends
• 6061-T651 billet aluminum
• Internal pockets engage housing lugs
• Prevents tube rotation
• Black anodized finish
Solid Preload Spacer
• Stainless steel
• Machined to precise width
• Prevents excessive bearing preload
Spindle Lock System
• Billet heat treated spindle nuts
• Threaded & non-threaded holes
• Dog pilot set screws engage washer
• Washer indexes on spindle keyway
• Maintains consistent bearing preload
Timken® Bearings & Races
• Oversized to increase load capacity
• Ensures long bearing life
• Proven quality from a trusted manufacturer
Wheel Hub
• 2024-T351 billet aluminum
• Scalloped with integral rotor mount
• Reduces weight and additional parts
• Lug design allows rotor to float
• Same hub as used for carbon brakes
• Simplifies later brake conversions
Press-in Wheel Studs
• 8740 chrome moly steel
• Anti-rotational head design
• 5/8″-18 available in two lengths
• Aluminum anti-marring washers
• Flanged steel lug nuts
Drive Plates
• 8620 chrome moly steel
• 40 spline with 45° pressure angle
• Scalloped to remove unnecessary weight
2 Pc Stainless Steel Brake Components
• 11 1/2″ OD x .355″ thick stainless steel rotor
• Internal lugs mate with aluminum hubs
• Floating design resists rotor cupping
• Includes aluminum caliper mounts
Four Piston Billet Calipers with Stainless Steel Pistons – B1900 / B1900-RD
• Billet aluminum bodies are extremely ridged & reduce weight
• Stainless steel pistons are corrosion resistant
• All pistons are 1.750″ to provide maximum clamping force
• Choice of black or red finish
Choice of Brake Pads
• Hard – B5020
• Soft – B5010
Options
Supply 4-Link Plates
Standard………………………….. OPRH40
Heavy duty……………………….. OPRH44
HD w/adj shock mnts……….. OPRH45 *
* Allows Ride Height Adjustments Without Affecting Stroke
Related Components
Floater Axles
Hy-Tuf…………………… A2040H24 / A2140H24
300M……………………. A2040M24 / A2140M24
Center Section
Ultra case………………… PRF225 / PRF225-10
Billet case………………… PRF425 / PRF425-10
The approximate size of the packed product or the sales package is 1670 x 410 x 350 mm.
Axle Type
Ford 10 in
Weight
123 kg(Includes the weight of the packaging)
Availability
Available to order from the supplier. Estimated time of arrival to us 15 - 90 day`s from order.
Delivery time?
Delivery time
If the product is in stock in Vantaa, it can usually be picked up or delivered within the same day.
If the product is in the supplier's stock, the product will arrive at the Vantaa warehouse the following week if the order is placed by Monday 6:00 p.m.
If product availability is zero. Ask for delivery time
Contact form
Look also terms & conditions
Notify me when this product is in stock again
Country of origin
United StatesCommentsAdd a comment
Brand