Artikel‪» Air and Fuel‪» Air Cleaners, Filters, Intakes and Components‪» Air Cleaner Assemblies and Air Intake Kits‪»

Proform - 141-307 - 14In Hi-Perf Air Cleaner W/ Plain Nut

Proform - 141-307 - 14In Hi-Perf Air Cleaner W/ Plain Nut

Proform - 141-307 - 14In Hi-Perf Air Cleaner W/ Plain Nut

Preis
130,77 enthält MwSt. 25.5% (104.20 €, mwSt. 0) + versand- und Zahlungskosten


Anzahl
stck


Die voraussichtliche Lieferzeit 7 - 15 Tage.
Abholstelle Vantaa0 stck
Lager des Lieferanten4 stck
Im Onlineshop erhältlich4 stck

Bestellungscode
PFM141-307
Produktbilder können vom tatsächlichen Produkt abweichen. Das Bild dient möglicherweise nur zur Veranschaulichung.
Der Preis beinhaltet gegebenenfalls die Frachtkosten vom Lieferanten zum Geschäft
Artikelbeschreibung

These air cleaner kits are offered in two styles, the classic, which reflects many years of GM air cleaner styling, and the newer high-performance look. They are equipped with the CHEVROLET Emblem, and they are supplied with genuine GM (AC) air filter elements for maximum airflow. Both the tops and the bases have matching finishes, except carbon-style, and each kit is supplied with necessary mounting hardware. The classic air cleaner kits are supplied with special die-cast Bowtie center nuts, except P/N 141-906, also offered separately. The 14 inch air cleaner kits are supplied with 3 inch tall filter GM P/N 6421746 or AC P/N A212CW. For buyers wishing a taller 4.031 inch filter, purchase GM P/N 8997189 or AC P/N A697C. The bases of the 14 inch air cleaner kits are recessed for a low profile appearance, maximum performance and hood clearance. Technical Note: After installing a new air cleaner kit, always lower the hood slowly to confirm sufficient clearance visually. Minimum clearance of 3.75 inches is required from the top of the carburetor gasket area to the underside of the hood.
Product Details:

  • Carburetor Air Cleaner Kit
  • 14 Inch Diameter
  • Base Drop 1 Inch
  • High-Performance Style With Stamped CHEVROLET Lettering
  • Made From Quality Steel With Chrome Finish
  • 2.75 Inch Installed Carb Height
  • Zinc Plated Wing Nut
  • 3 Inch Tall Paper Filter Included
  • GM Licensed Product
  • Sold As One Kit


Teilenummer des Anbieters: 141-307

Proform Catalog


Die geschätzte Größe des verpackten Artikels oder die Größe der Verpackung 361 x 102 x 397 mm.


Carb Flange
5-1/8 in


Gewicht
2,3 kg
(mit der Verpackung 3 kg)


Verfügbarkeit
Kann beim Lieferanten bestellt werden. Voraussichtliche Ankunftszeit bei uns 7 - 15 Tage seit der Bestellung, frühestens 19.4.2026.

Lieferzeit?

If the product is available at the Vantaa warehouse, it can be picked up or delivered—usually already within the same day.

Wenn ein Produkt eine voraussichtliche Lieferzeit von 7–15 Tagen anzeigt, läuft die Lieferantenbestellung so ab

Kontaktformular

Check also: Geschäftsbedingungen

Verfügbarkeit auf Lager
Ich möchte benachrichtigt werden, wenn dieser Artikel auf Lager ist


Kommentare
Hinterlassen Sie einen Kommentar

Marke



Inch Converter

Example: 2.375 = 2 3/8
Tip: rounded fraction is shown to the nearest 1/16.