Produkter‪» Air and Fuel‪» Air Cleaners, Filters, Intakes and Components‪» Air Cleaner Assemblies and Air Intake Kits‪»

Proform - 141-307 - 14In Hi-Perf Air Cleaner W/ Plain Nut

Proform - 141-307 - 14In Hi-Perf Air Cleaner W/ Plain Nut

Proform - 141-307 - 14In Hi-Perf Air Cleaner W/ Plain Nut

Pris
130,77 inkl. moms 25.5% (104.20 €, MOMS 0) + leveranskostnader


Antal
st


Leveranstid ungefär 7 - 15 dagar.
Uthämtningsställe Vantaa0 st
Leverantörens lager4 st
Tillgänglig4 st

Artikelnummer
PFM141-307
Produktbilderna kan skilja sig från den faktiska produkten. Bilden kan vara en illustration.
Priset inkluderar eventuell frakt från leverantören till butiken
Produktbeskrivning

These air cleaner kits are offered in two styles, the classic, which reflects many years of GM air cleaner styling, and the newer high-performance look. They are equipped with the CHEVROLET Emblem, and they are supplied with genuine GM (AC) air filter elements for maximum airflow. Both the tops and the bases have matching finishes, except carbon-style, and each kit is supplied with necessary mounting hardware. The classic air cleaner kits are supplied with special die-cast Bowtie center nuts, except P/N 141-906, also offered separately. The 14 inch air cleaner kits are supplied with 3 inch tall filter GM P/N 6421746 or AC P/N A212CW. For buyers wishing a taller 4.031 inch filter, purchase GM P/N 8997189 or AC P/N A697C. The bases of the 14 inch air cleaner kits are recessed for a low profile appearance, maximum performance and hood clearance. Technical Note: After installing a new air cleaner kit, always lower the hood slowly to confirm sufficient clearance visually. Minimum clearance of 3.75 inches is required from the top of the carburetor gasket area to the underside of the hood.
Product Details:

  • Carburetor Air Cleaner Kit
  • 14 Inch Diameter
  • Base Drop 1 Inch
  • High-Performance Style With Stamped CHEVROLET Lettering
  • Made From Quality Steel With Chrome Finish
  • 2.75 Inch Installed Carb Height
  • Zinc Plated Wing Nut
  • 3 Inch Tall Paper Filter Included
  • GM Licensed Product
  • Sold As One Kit


Leverantörens artikelnummer: 141-307

Proform Catalog


Storleken på den packade produkten eller förpackningen är ca 361 x 102 x 397 mm.


Carb Flange
5-1/8 in


Vikt
2,3 kg
(med förpackningen 3 kg)


Tillgång
Finns att beställa från leverantören. Beräknad ankomsttid till oss 7 - 15 dagar från beställningen, tidigast 19.4.2026.

Leveranstid?

If the product is available at the Vantaa warehouse, it can be picked up or delivered—usually already within the same day.

When the product shows an estimated delivery time of 7–15 days, this is how the supplier‑warehouse order progresses.

Kontaktformulär

Check also: leveransvillkor

Lagersituationen
Meddela mig när produkten kommer in i lager igen


Kommentarer
Lägg till en kommentar

Varumärke



Inch Converter

Example: 2.375 = 2 3/8
Tip: rounded fraction is shown to the nearest 1/16.