Dana - Spicer
94 produktů
Produkty» Drivetrain» Drive Shafts and Components» Yokes»
The price includes any freight from the supplier to the Store
Popis produktu
U-Joint Type
1310
Yoke Type
Flange Yoke
Hmotnost
1 kg(Produkt může mít lehký prodejní obal.)
Dostupnost
Ihned
Skladová dostupnost
KomentářePřidat komentář
Značka
Dana - Spicer - 2-2-1379 - Driveshaft Flange Yoke
Product Images may differ from the actual product. Image may be a representation of this item.
The price includes any freight from the supplier to the Store
Popis produktu
Yoke - Flange - 1310 Series - 5.219 in Diameter - Steel - Natural - Each
Additional information
A - Flange or Swing Diameter = 5.219 inches
B - Bolt Circle Diameter = 4.250 inches
Bolt Hole Diameter = 0.484 inches
Bolt Holes = 4
Bolt Holes = DRILLED
C - Center Pilot Hole Diameter = 2.0 inches
Center Pilot = FEMALE
Series = 1310 Outside Snap Ring Style
U-Joint Width between snap rings = 3.219 inches
D - U-Joint Bearing cap diameter = 1.062 inches
G - Center of u-joint bore to Face of flange = 1.625 inches
X - 3 inches
Y - 3 inches
Special Notes: Bolt holes are equally spaced. Part has hole thru center.
dana.com
Vendor Part Number: 2-2-1379
Přibližná velikost zabaleného produktu nebo prodejního obalu je 128 x 153 x 128 mm.
U-Joint Type
1310
Yoke Type
Flange Yoke
Hmotnost
1 kg(Produkt může mít lehký prodejní obal.)
Dostupnost
Ihned
Dodací lhůta?
If the product is available at the Vantaa warehouse, it can be picked up or delivered—usually already within the same day.
When the product shows an estimated delivery time of 7–15 days, this is how the supplier‑warehouse order progresses.
Kontaktní formulář
Check also: dodací podmínky
KomentářePřidat komentář
Značka
Inch Converter
Example: 2.375 = 2 3/8
Tip: rounded fraction is shown to the nearest 1/16.